Monday, May 30, 2011

Illegal act

The ABC is into publishing photos of defense installations which is against the law in this country. I might take a writ out against them..

Breaking the law

ABC TV news has done it again publishing photos of Amberly air force base on the nightly news tonight.

DEFENCE ACT 1903 - SECT 82

Sketching etc. of fortifications prohibited (1) If:
(a) a person makes a sketch, drawing, photograph, picture or painting of any defence installation in Australia or of any part of one; and
(b) the person has no lawful authority to do so;
then:
(c) the person is guilty of an offence; and
(d) all sketches, drawings, photographs, pictures, and paintings, and all tools and all materials or apparatus for sketching, drawing, photographing or painting found in his or her possession are forfeited and may be destroyed, sold, or otherwise disposed of, as the Governor-General directs.
(1A) The maximum penalty for an offence under subsection (1) is a fine of $200, imprisonment for 6 months, or both.
(2) If:
(a) a person enters or approaches any defence installation with sketching, drawing, photographing, or painting materials or apparatus in his or her possession; and
(b) the person has no lawful authority for that conduct; and
(c) the person intends to contravene subsection (1);
then:
(d) the person is guilty of an offence; and
(e) all tools and all materials or apparatus for sketching, drawing, photographing or painting found in his or her possession are forfeited and may be destroyed, sold, or otherwise disposed of, as the Governor-General directs.
(2A) The maximum penalty for an offence under subsection (2) is a fine of $100.
(3) A person is guilty of an offence if the person trespasses on:
(a) a defence installation, or on any land reserved for or forming part of one (whether or not any erection, fort, fortification, or work of any kind is on the land); or
(b) a building or land reserved or set apart for or used in connection with the administration, accommodation, or training of any part of the Defence Force; or
(c) an aircraft.
Penalty: $40.
(4) Any member of the Defence Force, member or special member of the Australian Federal Police or member of the Police Force of a State, may, without warrant, arrest any person who he has reasonable ground to believe has committed an offence against this section, and take him before a Court of summary jurisdiction to be dealt with according to law.
(5) In this section:
"defence installation" means any fort, battery, fieldwork, fortification, aircraft, air force establishment or aircraft material or any naval, military or air force work of defence.

I would like to thank the governor general for replying to my emails I wish.....

ANIMAL SLAUGHTER

I just watched Four corners tonight and what I saw was totally unexceptionable even for me as an ex-slaughterman.

Thursday, May 26, 2011

Mackers

Dear Sally,
Thank you for your reply, I was not concerned about the weight or the diameter or height of the big Mack. I was concerned with the way the big Mack in the photos did not match the actual size that was served to me . I did not mention the nutritional value or the amount of salt or sugar. I never once said the big Mack was smaller in any way. I am glad of the information especially that the size has not changed since 1971. I feel that to make sure that you know what I was talking about I would take some photos of one of your outlets menu board. For this I was threatened with eviction from the store and was told it was illegal after I took the photos. I feel disheartened for trying to bring a potential law suit to your attention. On the Hume highway there is a bill board on the left going into Gundagai which shows the real size in relation to the drinks. This looks good and even I know I couldn't eat a twenty foot high Big Mack. When you go into the store I see the photo is different to the billboard. Some how the Big Mack gets bigger compared to the drinks. I took some photos of my empty cartons and I couldn't get them as high as the drinks so I put the Big Mack carton on half of a Grand Angus pack and this gets near the height if it was put on a plate.

I have worked it out the store Photo was taken with a telephoto lens and the distance between the Big Mack and the drinks is probably about two to three feet. Then it could be you decreased the size of the drinks, that's it. This then makes the meal more healthy due to the less sugar used, thanks for looking after my health..











Dear Sally,
Thank you for your reply, I was not concerned about the weight or the diameter or height of the big mack. I was concerned with the way the big mack in the photos did not match the actual size that was served to me . I did not mention the nutritional value or the amount of salt or sugar. I never once said the big mack was smaller in any way. I am glad of the information especially that the size has not changed since 1971. I feel that to make sure that you know what I was talking about I would take some photos of one of your outlets menu board. For this I was threatened with eviction from the store and was told it was illegal after I took the photos. I feel disheartened for trying to bring a potential law suit to your attention. On the Hume highway there is a bill board on the left going into Gundagai which shows the real size in relation to the drinks. This looks good and even I know I couldn't eat a twenty foot high Big Mack. When you go into the store I see the photo is different to the billboard. Some how the Big Mack gets bigger compared to the drinks. I took some photos of my empty cartons and I couldn't get them as high as the drinks so I put the Big Mack carton on half of a Grand Angus pack and this gets near the height if it was put on a plate.

I have worked it out the store Photo was taken with a telephoto lens and the distance between the Big Mack and the drinks is probably about two to three feet. Then it could be you decreased the size of the drinks, that's it. This then makes the meal more healthy due to the less sugar used, thanks for looking after my health...




Monday, May 23, 2011

Teck screws

I was questioned about my welds today and would like to let you all know that a Teck screw will hold on a 3mm screw a quarter of a ton in sheer. I would think the wood would give away first but it doesn't. Then my crane on my trailer will hold a ton on a meter radius with four 1/2" bolts in tension. The load is only on two of those bolts at a time. So how much will my welds hold?
6" long weld with a depth of .25" well 6x.25"=1.5 sq inches
Steel carry's a load of 25 tons per square inch so my welds should carry 37.5 tons

Concrete footings

It amazes me when they poor great masses of concrete into holes in the ground for house footings.
Generally houses are in the range of forty tons and twenty tons is in the footings. Now if I were building a boat I would put all that weight at the bottom to keep the boat upright and this is a good thing. If I were to build a boat of forty tons I would get a stronger structure than a house, and the thing would carry a load of forty tons making it eighty tons.
The buoyancy of land to carry loads is greater than that of water. Let me explain, drive a heavily loaded truck on a road and its OK now drive it onto soft wet ground and it will get bogged, drive it into water and it will go straight to the bottom. So all three surfaces have a buoyancy, the road, the soft wet ground and the water. Now it is no good putting all that concrete into the ground if it is going to sink.
Lighter load for softer ground. Next to spread the load a boat has a surface area now put the boat onto the ground and it will support a massive amount of load with out sinking into the ground. Thats why big trucks have lots of tires to support the load so as not to sink into the road. If a building is going to move bigger and more concrete is not best. If I were going to build on soft ground I would go for surface area and allow the whole building to move as a whole.
I did work years ago as a drilling contractor and on one job in Corrimal in NSW. there was a skin of hard ground about three feet thick and below that the drilling rig would have sunk over eighteen feet threw the underlying mud.
How did I know well when we broke threw the skin I was able to push the drill bit that was three feet in diameter to the full extent of the machine with out turning the bit. The capacity of the machine was close to twenty feet for the depth of hole. So putting big concrete footing into the ground would have resulted in the building sinking over twenty feet threw the mud.
Any ground can be built on it just takes imagination as to how to over come a sites special needs.