Wednesday, November 11, 2009
Noddy and the Farmyard Muddle. or Murder
Noddy will never be the same without Mr Golly. Who will fix Noddy's car at a reasonable rate? Noddy doesn't have a lot of money. Will Mr Sparks rip Noddy off? Were all the golliwogs murdered?
That white-faced Mr Sparks, who become the proprietor of the Toytown garage that fixes Noddy's car! Is Mr Sparks a developer? Did Mr Sparks pay a bribe to the mayor of Wollongong city council. Is he a scoundrel for erasing Mr Golly from the new book? Is he a member of the mafia? Has he paid off the ICAC? Is he a drug lord pushing pills from the garage? Is the box Mr Golly's coffin? Or is it mine? :)
The question is, was Mr Golly murdered and his belongings stolen from his family? Where is Mr Golly's body? HeHe HeHe :)The plot thickens. ;) Will the truth will come out in time? Is Plodd good enough to catch the perpetrators?
Or were these figarines found at the local rubbish tip? Were they found there? Who put them there and why , the plot thickens.
( Wollongong is a city 50 miles south of Sydney, Australia)
(ICAC is the Independant commission against corruption in N.S.W. Australia)
Tune in for the next episode of the missing Mr Golly and all the black golliwogs...and is bribery and corruption alive and well in the government of N.S.W.? HeHeHe :)$$$$:)
House for sale
under offer
Sorry for commercialising the blog.
All of the dead trees are gone they had a horse on the property before I bought it, and it was lacking salt and it ring barked the trees to get salt. Did you know that when sheep are feeding during the heat of the day they are probably starving, Even if the grass looks green. Well fed sheep and cattle eat in the cool of the morning or evening and are not on the paddocks during the heat of the day, same goes for Kangaroos and wombats that is why it is dangerous to drive at dusk.
This house is for sale it has about 1 acre of land walking distance from the main street of Gundagai. Just post a comment and I will get back to you if you want to buy it. The selling price is $130,000 Australian.
Tuesday, November 10, 2009
Steel mills
Gallaway steam engine
As an apprentice I worked in the billet mill at AIS Pt.Kembla. On down days we were assigned to work in various parts of the mill. In the soaking pits the billets were red hot and in the crane over the the soaking pits had to be worked on while the operation could not stop and the temperature was over 140 degrees and you could not put your spanners down cause if you did they were too hot to pick up again. We worked five minutes on and half an hour off. On one occasion I worked in the Galloway steam engine the largest horizontal steam engine in the southern hemisphere. I could stand in the high pressure cylinder and the stroke was probably 10 feet long. This engine drove the mill to produce railway lines, the rolls were 36 inches diameter and this engine nearly stalled when the rolls were squeezed to close. It was about 5 thousand horse power. They also squeezed down steel ingots to be used in the billet mill, the steel started as from memory 3ft square and went into the mill at about three miles an hour and came out the other end at thirty miles an hour. Some times we had a cobble, that's when the steel goes the wrong way and comes out the side of the mill and goes any where and the process can not be stopped till the steel stock is threw the last rolls. There is a fifty ton billet that is squeezed into a three inch billet and all this steel is wrap around the mill like spaghetti then it cools and hardens and has to be cut up with oxyacetylene. At the end of the mill the steel is cut into billets to feed the wire mill, this is done on the flying shears at thirty miles an hour the blades slam shut every two seconds at the end of each billet, each billet was about forty feet long. From the billet mill the billets are reheated to white hot again and put threw the wire mill rolls and the length of the wire is a mile or more long after this. The blokes who worked there were cool to watch as they grabbed the red hot steel and sent it back the other way threw the second rolls and again threw the third rolls.
Posted by imagineering at 2:51 AM
As an apprentice I worked in the billet mill at AIS Pt.Kembla. On down days we were assigned to work in various parts of the mill. In the soaking pits the billets were red hot and in the crane over the the soaking pits had to be worked on while the operation could not stop and the temperature was over 140 degrees and you could not put your spanners down cause if you did they were too hot to pick up again. We worked five minutes on and half an hour off. On one occasion I worked in the Galloway steam engine the largest horizontal steam engine in the southern hemisphere. I could stand in the high pressure cylinder and the stroke was probably 10 feet long. This engine drove the mill to produce railway lines, the rolls were 36 inches diameter and this engine nearly stalled when the rolls were squeezed to close. It was about 5 thousand horse power. They also squeezed down steel ingots to be used in the billet mill, the steel started as from memory 3ft square and went into the mill at about three miles an hour and came out the other end at thirty miles an hour. Some times we had a cobble, that's when the steel goes the wrong way and comes out the side of the mill and goes any where and the process can not be stopped till the steel stock is threw the last rolls. There is a fifty ton billet that is squeezed into a three inch billet and all this steel is wrap around the mill like spaghetti then it cools and hardens and has to be cut up with oxyacetylene. At the end of the mill the steel is cut into billets to feed the wire mill, this is done on the flying shears at thirty miles an hour the blades slam shut every two seconds at the end of each billet, each billet was about forty feet long. From the billet mill the billets are reheated to white hot again and put threw the wire mill rolls and the length of the wire is a mile or more long after this. The blokes who worked there were cool to watch as they grabbed the red hot steel and sent it back the other way threw the second rolls and again threw the third rolls.
Posted by imagineering at 2:51 AM
Monday, November 9, 2009
hayfever
This does not come under the blogs heading so it is in a category of its own.
Just got some new tablets and the price has doubled in less than 12 months by halving the quantity.Thirty to Twenty.The last time you raised your price you changed the colour of the packet. The brand name is POLARAMINE made by Schering-Plough Pty Limited Level4,66Waterloo Road North Ryde.NSW 2113 Australia. Thanks guys, I now know how much you love money So watch your selves for loving money. You know what it says about loving money.You have got me as I have no other choice.If you have hay fever try putting a bit of bi carb soda in some water and sniffing it up your nose , it works and there is less need for the drug lords... cheers Stewart
Sunday, November 8, 2009
steel boat
Finally have just launched the steel boat went like a dream the total cost is around $500 for boat and trailer. I can stand on the back corner and the thing don't try to tip you in the water it is really stable. I would recommend building in steel using 1.2 steel plate, the cabin is square tube covered in alloy sheet and glued in with Sega flex. I wouldn't use this glue again as it let go and the cabin vibrates... cheers Stewart
working trailer
This is my working trailer that I have had for many years,the hoist is welded to the frame and has lifted over a ton and broken welds.I used it as a mobile butcher shop to dress sheep, there was a plastic pallet that fitted on the top as a table and was easily cleaned down after use,It carried my little excavator ride on lawn mowers and any other job that needed doing. It was also a mobile scaffold with the scaffold tied down with ropes.It also served to gather fire wood.The tray is aluminum plate.The box on the front is water and dust proof and is used to hold ropes chains and spare wheel bearings.Again this is recycled steel and bits. cheers Stewart
Tuesday, November 3, 2009
steel boat
Put the outboard bracket on the boat today. This boat will be launched this week end at the Narooma traditional boat festival.
cheers Stewart
Subscribe to:
Posts (Atom)